%0 journal article
%@ 1047-4838
%A Vale, N.,Fitseva, V.,Urtiga Filho, S.,dos santos, J.,Hanke, S.

%D 2019
%J JOM: The Journal of the Minerals, Metals and Materials Society
%N 
%P 4339-4348 
%R doi:10.1007/s11837-019-03677-4
%T Comparison of Friction Surfacing Process and Coating Characteristics of Ti-6Al-4V and Ti Grade 1
%U https://doi.org/10.1007/s11837-019-03677-4
 
%X Friction surfacing is a coating process for extending the service life of components by repairing surface damaged, reducing wear, and improving anticorrosion properties. Ti-6Al-4V and titanium grade 1 have been deposited onto Ti-6Al-4V substrate to investigate the differences in material and processing behavior and analyze the coatings’ geometry and hardness. The deposition speed and consumption rate were kept constant at 16 mm/s and 1.8 mm/s, respectively, while the rotational speed was varied to 2000 rpm, 3000 rpm, or 4000 rpm. The force increased with the rotational speed, being about 10 times higher for Ti-6Al-4V compared with titanium grade 1. The peak temperatures were higher for titanium grade 1, and the β-transus temperature was exceeded in all experiments. The hardness of the coatings was about 16% higher compared with that of the Ti-6Al-4V substrate, due to formation of martensitic structure. The hardness did not vary significantly across the width of the coatings.