%0 journal article
%@ 0254-0584
%A Dharmendra, C.,Rao, K.P.,Prasad, Y.V.R.K.,Hort, N.,Kainer, K.U.

%D 2012
%J Materials Chemistry and Physics
%N 2-3
%P 1081-1091 
%R doi:10.1016/j.matchemphys.2012.08.054
%T Hot working mechanisms and texture development in Mg-3Sn-2Ca-0.4Al alloy
%U https://doi.org/10.1016/j.matchemphys.2012.08.054
2-3 
%X Hot deformation mechanisms in Mg-3Sn-2Ca (TX32) alloy containing 0.4% Al are evaluated in the temperature and strain rate ranges of 300–500 °C and 0.0003–10 s−1 using processing map and kinetic analysis. The evolution of microstructure and texture during high temperature compression of the alloy has been studied using an electron back scatter diffraction (EBSD) technique. The processing map for hot working revealed two domains of dynamic recrystallization (DRX) occurring in the temperature and strain rate ranges of: (1) 300–360 °C and 0.0003–0.001 s−1 and (2) 400–500 °C and 0.005–0.7 s−1, which are the two safe hot workability windows for this alloy. A regime of flow instability occurs at higher strain rates and lower temperatures where adiabatic shear banding and flow localization are the microstructural manifestations. The onset of DRX during compression at lower temperatures and strain rates (Domain 1) resulted in a fine, partially recrystallized and necklaced grain microstructure along with a texture where the basal poles are spread along 30° from the compression direction. Specimens deformed at temperatures higher than 450 °C (Domain 2) resulted in a fully recrystallized microstructure and an almost random crystallographic texture, which was attributed to the significant occurrence of pyramidal slip and associated cross-slip.